How To Make Your Concrete Floors A Work Of Art – Landscape Genius

How To Make Your Concrete Floors A Work Of Art

Posted on July 9, 2018 By

Concrete foundations are essential for nearly every type of building. There are several various kinds of slabs which can be used to make the base of your building. Fortunately, these do not need to be dull and boring. Much like polished concrete, with a sprinkle of color here and there, you can easily change your own floors into a work of art.

Read on to find out everything you need to understand coloring concrete foundations.


Before you attempt to include color or make patterns on the cement flooring, it is extremely important to understand whether your project will be able to withstand the particular changes which you intend to make. This means that your concrete slab must be intact before you can start designing this.

Since seams and crevices in your flooring can practically ruin the design, it is necessary to repair your concrete flooring before you try to personalize this. It is also important to know that you cannot paint a concrete surface with out it is cured. Therefore, if you have the cement slab which was recently constructed and installed, it is necessary to wait a minimum of four weeks before you can start painting this.

New concrete structures must also be left to dry out normally without the use of any curing chemical substances. Since the addition of chemicals and other drying out agents can cause problems during discoloration, if you wish to design and personalize your house, it is best to leave the concrete surface area to dry naturally even if it requires a little longer than four weeks. Once the concrete has dried, polymer fillers should be used to fill any kind of cracks in the cement slab.

Once the concrete has released and has been repaired, the next step is in order to thoroughly clean the entire surface before you color it. Since it is very easy and typical for dirt and other contaminants to obtain stuck into it, you should use a power washing machine for exterior surfaces. An extra cleaning agent may be required for the interior.


The roller that you will be using to paint this, needs to be cleaned to ensure that the end result does not need any blemishes or other pollutants like grime. When you start artwork it, a paint brush ought to be used to paint the grooves from the concrete. Initially, it might seem like plenty of paint is required to paint your surface area, but this is only because a lot of the paint will be absorbed with the concrete.

Once the first layer has dried, you can then add similar coats of stain depending on your own required color and finish. In case you want to apply textured color to it, you will have to use a primer before you start applying to stain. If the primer is not used beforehand whenever applying textured paint, it is very most likely that the end result will not be as good as anticipated. With the new surface, concrete fundamentals commonly mimic the modern look associated with natural stone.

Landscape Retaining Walls     , , ,

    Leave a Reply

    Your email address will not be published. Required fields are marked *